Motorola Z6C - Manual (Page 17)

15 essentials
turn it on & off
To turn on your phone,
press and hold the
Power/End key ( O ) until
the display turns on.
The phone may require several seconds to turn on. If
prompted, use the keypad to enter your four-digit
unlock code (which, by default, is the last four digits of
your phone number) and press the center select
key ( s ) (OK) to unlock the phone.
To turn off your phone, press and hold the
Power/End key ( O ).
lock & unlock slider
You can lock your phone to keep
from accidentally pushing external
keys when the slider is closed. To
lock the phone, push the Lock Key
up.
Note: If you open the slider or
receive a call, the keypad is
automatically unlocked, even
when the lock key is in the locked.
position.
When the phone is off and locked, the phone will not
turn on, but will briefly display a white padlock ( # ) to
remind you that you have locked the phone.
make a call
Open the slider, enter a phone number, and press the
Send key ( N ) to make a call.
>
Side
Lock
Key