Specifications – Motorola CDMA 800/1900 MHz User Manual
Page 8
8
May 15, 2006
6809501A03-O
Specifications
Q CDMA
Specifications
General Function
Specification
Frequency Range 1900 MHz PCS
1931.250 -1988.750 MHz Rx
1851.250 -1908.750 MHz Tx
Frequency Range 800 MHz CDMA
869.70 - 893.31 Rx
824.70 - 848.31 Tx
Channel Spacing
50 kHz PCS
30 kHz CDMA
Channels
1150 PCS
788 CDMA 800
Modulation
1M25D1W (1.25 MHz bandwidth) CDMA
3G1XRTT (1.25 MHz bandwidth) CDMA-1X
Duplex Spacing
80 MHz PCS
45 MHz CDMA 800
Frequency Stability
± 150 Hz (CDMA)
Power Supply
3.6V Li Ion 1130 mAh battery
Average Transmit Current
310 mA at +13 dBm)
Average Stand-by Current
3.40 mA
Dimensions (WHD)
(with 1130 mAh Li Ion battery)
64mm x 116mm x 11.5mm
2.5 in. x 4.5 in. x 0.4 in.
Size (Volume)
80 cc (4.8 in.
3
) without antenna
Weight
<115g (4.65 oz) with battery
Temperature Range
-30° C to +60° C (-22° F to +140° F)
Humidity
80% Relative Humidity at 50° C (122° F)
Battery Life, 1130 mAh Li Ion Battery
Up to 180 minutes digital talk time (IS 95 A/B)
Up to 250 hours (IS 95 A/B) standby time
Up to 350 hours (IS 2000) standby time
All talk and standby times are approximate and
depend on network configuration, signal strength,
and features selected.
Transmitter Function
Specification
RF Power Output
0.20 watts -23 dBm into 50 ohms (CDMA
nominal)
Input/Output Impedance
50 ohms (nominal)
Transmit Audio Response
6 dBm/octave pre-emphasis
Modulation
1M25DIW (1.25 MHz bandwidth) CDMA
CDMA Transmit Waveform Quality
(Rho)
0.94
Receiver Function
Specification
Receive Sensitivity
-104 dBm (CDMA, 0.5% Static FER) 0.5% or less
Audio Distortion
Less than 5% at 1004 Hz, +/- 8 kHz peak
frequency deviation (transmit and receive)
Adjacent and Alternate Channel
Desensitization
3% BER max at 107 dBm signal; -94 dBm/30 kHz,
-65 dBm/60 kHz