Motorola CDMA 800/1900 MHz - Manual (Page 24)

24 May 15, 2006 6809495A97-O
Disassembly Q CDMA
Removing and Replacing the Antenna
1. Remove the battery cover, battery and rear housing as described in the
procedures.
2. Insert one prong of the metal tweezers into the access slot to release the snap
securing the antenna carrier to the main PC board.
3. Once the snap is released, lift the antenna carrier straight up and away from
the phone. Avoid damage to the pogo pins (see Figure 11).
4. To replace, align the antenna carrier to the phone.
5. Press the antenna carrier onto the main board until the snaps engage.
6. Replace the rear housing, battery, and battery cover as described in the
procedures.
060200o
Figure 11. Removing the Antenna Carrier
Antenna carrier
Snap
Access slot