Motorola CDMA 800/1900 MHz - Manual (Page 29)

6809495A97-O May 15, 2006 29
Level 2 Service Manual Disassembly
3. Carefully remove the main board and keyboard out of the front housing.
4. To replace, align the main board and keyboard to the rear housing assembly
and lower it into place on the rear housing.
5. Press display flex onto transceiver board adhesive.
6. Press display flex connector onto its socket.
7. Replace the keyboard stiffener, speaker cover, keypad bezel, antenna, battery,
and battery cover as described in the procedures.
060252o
Figure 16. Removing the Main Board and Keyboard
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
Disassembly tool
Main board
Keyboard