Motorola CDMA 800/1900 MHz - Manual (Page 23)

6809495A97-O May 15, 2006 23
Level 2 Service Manual Disassembly
Removing the Motor/Vibrator Assembly
1. Remove the battery door, battery, and rear housing, as described in the
procedures.
2. Use the plastic tweezers to lift the motor/vibrator assembly out of the rear
housing (see Figure 10).
3. To replace, align the motor/vibrator assembly to its place in the rear housing
assembly.
4. Carefully press the motor/vibrator assembly into position in the rear housing.
Ensure the motor/vibrator shaft turns freely.
5. Replace the rear housing, battery, and battery door as described in the
procedures.
060346o
Figure 10. Removing the Motor/Vibrator Assembly
Motor/vibrator assembly
Rear housing assembly
Plastic tweezers