beautypg.com

Removing the camera assembly – Motorola CDMA 800/1900 MHz User Manual

Page 26

background image

26

May 15, 2006

6809495A97-O

Disassembly

Q CDMA

Removing the Camera Assembly

1.

Remove the battery door, battery, rear housing, antenna, and daughter board
as described in the procedures.

2.

Insert the flat end of the disassembly tool under the edge of the camera
connector and rotate the tool to unseat the camera connector from the socket
(see Figure 13),

G

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.

060215a

Figure 13. Removing the Camera Assembly Connector

Camera

connector