Motorola CHARM MB502 - Manual (Page 38)

36 Wireless
Wireless
lose the wires and go wireless
Quick start: Wireless
To connect a Bluetooth® headset or car kit, press
Menu
> Settings > Wireless & networks >
Bluetooth settings
To use a Wi-Fi® network for fast Internet access and
to download data, press Menu
> Settings >
Wireless & networks > Wi-Fi settings.
Note: Your phone's Wi-Fi features and power levels
are not allowed for outdoor operation in France. To
avoid unlawful interference with radio signals, do not
use the Wi-Fi features in France unless you are
indoors.
Bluetooth devices
Bluetooth settings
(your phone’s name)
Device name
Pair with this device
(found device name)
Make device discoverable
Discoverable
Scan for devices
Bluetooth
Turn on & scan.
Change your phone’s
Bluetooth name.
Connect.
Let Bluetooth devices
find your phone.
Turn Bluetooth power on or off
Find it: Menu > Settings > Wireless & networks
> Bluetooth
Note: To extend battery life, turn Bluetooth power
off when not in use.
Connect Bluetooth devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Press Menu > Settings > Wireless &
networks > Bluetooth settings.
3 Touch Bluetooth to turn on and scan. If Bluetooth
power is already on, touch Scan for devices.
4 Touch a device to connect.
5 If necessary, touch OK, or enter the device passkey
(like 0000) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.