Metz MF 72TK80 - Manual (Page 71)

71
35. Glossary
AV programme position
AV devices have one or more sockets, depending
on the model. These sockets are labelled on the
device, for example with AV1.
These sockets can be selected on the AV device
and the selected socket is shown on the display of
the AV device, for example A1 for socket AV1.
Bandwidth (optional)
The bandwidth needs to be set for sound sub-car-
riers. For ASTRA stations, the bandwidth should
normally be set to 130 kHz.
Stereo wide
When receiving programmes with stereo sound,
the physical distance between the loudspeakers
can be increased artificially to improve the stereo
effect.
Code
The settings for the childlock are protected by a 4-
digit numerical code which you can set a desired.
Write down or remember the code you define. If
you forget the code, ask your local dealer for assi-
stance
CTI
The CTI (Colour Transient Improvement) circuit is
an electronic circuit which ensures precise transi-
tions between differently coloured parts of the pic-
ture, preventing the colour smearing which could
otherwise occur. The CTI function is active for pro-
grammes received via the antenna input and for
picture signals from AV devices.
De-emphasis (optional)
This is a method for reducing noise on the sound
channel of stations received via satellite. The
appropriate settings can be found in specialist
magazines.
For ASTRA stations, always select „Panda“.