Metz MF 72TK80 - Manual (Page 6)

6
The Metz remote control unit RG 12 can
be used to remotely control all Metz TV
sets with the type designation "TH" (see
the Operating Instructions of the TV set
or look at the label on the back of the
set) or later models (such as TK, TL, ...)
as well as video recorders VCR1 and
VCR 2, DVD players and HiFi equip-
ment (such as radios, cassette players,
CD players, amplifiers, etc.) made by
Metz or various other manufacturers.
The remote control unit transmits com-
mands to the TV set with the aid of infra-
red light. You should always point the
remote control unit directly at the TV set.
The remote control unit may possibly inter-
fere with other infrared devices (such as
infrared headphones) within its range.
Sunlight falling directly on the TV
set may interfere with the operation
of the remote control unit, because
the TV set cannot detect the infra-
red signals from it. The TV set must
first be switched on with the main
switch before the remote control
unit can be used.
The remote control unit is programmed
as follows before it leaves the factory:
• TV Metz TV sets with the type designation "TH"
• VCR1 Metz video recorders with remote
control unit RH51
• VCR2 Metz video recorders with remote
control unit RF52
• DVD Metz DVD players with remote
control unit RG/RH374
• HiFi Metz HiFi CD receiver HE 11 with remote
control unit F11
☞
3. Remote control unit
³
ባ
ቤ
ት
ቶ
ᕤ
ᕥ
ቧ
ቨ
ᕨ
ቫ
ቪ
ቭ
ቮ
ቯ
ቱ
ƹ
ƻ
ቴ
ታ
21
22
Never load rechargeable batteries
into the battery compartment of the
remote control unit!
Only use two 1.5V LR03/AM4 batte-
ries, size AAA.