Metz MF 72TK80 - Manual (Page 20)

20
• In the setting window which is then displayed,
move the cursor to „Channel“ or „Special chan-
nel“.
• Enter the number of the channel or special
channel with the numeric keys.
• Press the „OK“ key to save the station.
• Press the „TV“ key to close the menu.
Fine tuning
When you programme stations, each channel is
automatically tuned to the centre frequency. This
is normally sufficient. If this automatic function
does not produce satisfactory results, you can
carry out fine tuning.
Executing fine tuning
• Select the desired programme position.
• Press the „MENU“ key.
• Press the white key
to open the sta-
tion table.
• Move the cursor to the subject card
„Frequency/Channel“.
• Press the „OK“ key to confirm your
selection.
• In the setting window, select „Frequen-
cy“ and use the - + key to change the
frequency value until the picture is as
clear as possible.
• Save the new setting by pressing the „OK“ key.
• Press the „TV“ key to close the menu.
7. Programming stations Call the menu
Channel 6 Cable channel --
Frequency 182.31 MHz
Scan operation ARD
Change value with
+ and -
Confirm with OK
Picture-Volume
AV devices
Station table
Timer
Configuration
TV
-Menü
Station table
MENU
OK
OK
‚ ‚ ‚