Metz MF 72TK80 - Manual (Page 43)

43
20. Special functions
Picture format
Call the menu
Calling the picture format function:
• If "F1" is already programmed with the function
"Picture format ", briefly press the "F1" key;
otherwise, hold the "F1" key depressed until
"Special functions 1" is displayed and then press
the ቤ key and select the desired picture format.
• You can use the "P+/P-" rocker key to select the
various functions. You can also set the zoom
factor for the selected picture format within the
next five seconds.
• The settings made here (except for the auto-
matic zoom in the TV menu) remain stored
until you switch to another programme
position or switch off the TV set.
Zoom
After selecting the "Zoom" function, you can
adjust the zoom factor with the – + key.
In addition to adjusting the zoom factor, you
can move the picture up or down on the
screen so that, for example, the station logo
or subtitles remain visible. To do this, press the F1 key
and then the
ብ key and move the picture with the
"P+/P-" rocker key.
Standard 4:3
This is the standard setting for all programmes
with the aspect ratio 4:3.
Panorama*
With the Panorama function, you can adjust the picture of
a programme in 4:3 aspect ratio to fill the 16:9 format of
the screen (only on sets with 16:9 screen). The picture is
expanded uniformly in the horizontal direction. You can
also zoom the picture. The Panorama function can be swit-
ched on and off in the menu "Picture and Sound" under the
heading "Picture settings, general".
16:9 full screen
This function is used to display the picture format
of external devices (such as 16:9 video recorders)
with the correct aspect ratio.
F1
3
Special
Functions 1
PIP on
9-programme on
Picture format
ᕡ
ᕢ
ᕣ
*The menu item "Panorama"
can be activated only on TV
sets which support the 16:9
aspect ratio.