Metz MF 72TK80 - Manual (Page 19)

19
Call the menu 7. Programming stations
Executing a station search
• Press the „MENU“ key to display the TV menu.
• Press the white key
to display the station
table.
• Move the cursor to en empty programme posi-
tion (or to a position containing a station you
wish to replace with the new station).
• Move the cursor to „Frequency/Channel“.
• Press the „OK“ key.
• In the setting window which is then displayed,
move the cursor to „Search“.
• Press the - + key to start the search.
• The search stops when the first station
is found.
• If you want to save this station, press
the „OK“ key.
• If you do not want to save this station,
press the - + key again to continue the
search.
c) Direct channel input
You can programme a station directly by
entering its channel number with the
numeric keys (you must, of course, know the
channel number of the desired station).
Executing direct channel input
• Press the „MENU“ key to display the TV menu.
• Press the white key
to display the station
table.
• Move the cursor to en empty programme posi-
tion (or to a position containing a station you
wish to replace with the new station).
• Move the cursor to „Frequency/Channel“.
• Press the „OK“ key.
009 MDR
008 SW 3
007 N24
006 PRO 7
005 RTL
004 SAT 1
003 Bayern 3
002 ZDF
001 ARD
Channel 6 Cable channel --
Frequency 182.31 MHz
Scan operation ARD
: select,
OK: go to
settings.
Picture-Volume
AV devices
Station table
Timer
Configuration
Decoder
Sound correction
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Frequency/channel
TV-standard 2)
TV
-Menü
Station table
MENU
OK
OK
‚ ‚ ‚
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting.
2) Available only on TV sets
which are equipped with this
option.