Metz MF 72TK80 - Manual (Page 29)

29
12.1 Sound settings for a specific
programme position ..
Call the menu
In a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
If the standard settings are not satisfactory for cer-
tain programme positions, you can define diffe-
rent settings for these positions with the menu item
„Sound settings for Pr...“. These settings apply
only to the selected programme position and can-
not be overwritten by the standard settings.
Defining different sound settings for Pr. xy:
• Select the programme position for
which you want to define different
sound settings.
• Press the „MENU“ key to open the TV
menu.
• Use the blue key to select the menu
„Picture and sound“ and press the
„OK“ key to open it.
• Use the cursor control key to select the
item „Sound settings for Pr. xy“.
• Press the „OK“ key and then select the
setting you want to change.
• Press the „OK“ key to confirm your selection
and then, in the setting window, use the - + key
to change the setting.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
You can also define and recall the individu-
al sound settings in the station table.
☞
☞
MENU
OK
OK
OK
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
These settings apply to the currently selected programme
position. : select,
OK: go to
settings.
AV devices
Station table
Timer
Configuration
Forced mono*
Tone settings*
Volume correction
TV
-Menü
Picture-Volume
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting.
‚ ‚ ‚