Metz MF 72TK80 - Manual (Page 24)

24
11. Picture settings, general Call the menu
In a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
You can adjust the picture settings (brightness,
contrast, chrominance, etc.) for all programme
positions and save these settings as the standard
values. These standard values can be recalled at
any time by pressing the „OK“ key.
Defining the picture settings:
• Press the „MENU“ key to open the TV menu.
• Press the „OK“ key to open the menu „Picture
and sound“.
• Use the cursor control key to select the
individual picture settings.
• Press the „OK“ key and then use the
- + key to change the setting in the set-
ting window.
• Use the cursor control key to select the
3rd line in the setting window "...
accept as a standard value: OK".
• Save the new setting as the standard
value by pressing the „OK“ key.
• Press the „TV“ key to close the menu
If these standard settings are unsatisfactory
for some programme positions, you can
define special individual settings for these
positions as described on the next page.
2) Rotation
This function can be used to compensate for any
tilting of the picture caused by the earth’s magne-
tic field. The function should be executed when the
set is first installed and if the set is subsequently
moved to a different position.
3) Film mode – see glossary.
2) Available only on TV sets which are equipped
with this option.
☞
☞
MENU
OK
OK
OK
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
Brightness 61
Standard value 50
Accept 61 as the standard value:
: select,
OK: go to
settings.
AV devices
Station table
Timer
Configuration
Picture pos.,vertic*
Film mode*
2)
CTI*
Comb filter
Noise reduction
Picture sharpness
Colour intensity
Contrast
Brightness
TV
-Menü
Picture-Volume
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting.
‚ ‚ ‚