Metz MF 72TK80 - Manual (Page 36)

36
Call the menu 15. Childlock
OK
OK
c) Start and end times
Use the cursor control key to open the file card
„Start viewing time/End viewing time“„ and
press the „OK“ key. In the setting window, enter
the start and end times with the numeric keys.
Protecting the childlock settings with a code
• Use the cursor control key to open the
file card „Code input“ and press the
„OK“ key. In the setting window, enter
your personal code with the numeric
keys.
Make a note of the code, since the
childlock can be switched off only
by entering it again!
• Press the „OK“ key to save the code.
• Press the „TV“ key to close the menu.
• Switch off the TV set with the
key.
The childlock is activated only when the TV
set is switched off.
Deactivating the childlock
If the childlock is active, this is indicated by the
display of a message when you switch the TV set
on. If you then enter the correct code, the child-
lock is temporarily deactivated and the TV set can
be operated „normally“ as long as it remains
switched on. If you wish to permanently deactiva-
te the childlock, proceed as follows:
• Press the „MENU“ key to open the TV menu.
• Press the green key
to open the menu
„Timer“.
• Use the cursor control key to select „Childlock“
and press the „OK“ key.
• In the setting window, use the – + key to set the
childlock to „Inactive“.
• Press the „OK“ key to save the new setting.
☞
☞
Time settings
Timer control
Reminder*
Childlock
Code * * * *
: select,
OK: go to
settings.
Picture-Volume
AV devices
Station table
Timer
Configuration
End viewing time*
Start viewing time*
Code input
Permitted programmes*
Childlock
TV
-Menü
Timer
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting.
‚ ‚ ‚