Minolta PageWorks 18L - Manual (Page 67)

3-7
Loading Paper
Using the Printer
Chapter 3
Loading Paper onto Tray 2/Tray 3
Note
1
Slide Tray 2/Tray 3 out of the second/third paper cassette unit
as illustrated.
Note
• Make sure that the Tray 2/Tray 3 cassette for the proper size of paper
to be used for printing has been installed into the second/third paper
cassette unit. For instructions on inserting (and removing) the Tray 2/
Tray 3 cassette into (and from) the second/third paper cassette unit,
refer to Chapter 2.
• The cassette is designed to remain in the unit during the normal loading
and operation of the printer. To remove Tray 2/Tray 3 from the unit,
pull it out as far as it will go without force. Then gently raise the for-
ward-end up, and remove Tray 2/Tray 3 from the unit.
• Tray 2 and Tray 3 are available as an option for this printer. Contact
Minolta Technical Support to find out how you can acquire this tray to
increase the capabilities of your printer.
Tray 2 Tray 3