Minolta PageWorks 18L User Manual
Page 51
2-21
Options
Setting-up
Chapter 2
3
With one hand holding the duplex unit in position, use a Phillips
screwdriver to tighten the screws that are permanently attached to
the back of the duplex unit.
Note
4
Connect the power cord to the printer and then turn the printer on.
See “Connecting the Power Cord”, page 2-9.
See “Turning On the Printer”, page 2-12.
5
Select the Printer Information in the Printer Status Display to ver-
ify that duplex unit is displayed in the Printer Information dialog.
See page 4-64 “Displaying Printer Information...”.
• Hold up the duplex unit with your hand during installation until it is
secured to the printer with the screws.