Motorola ADVENTURE V750 - Manual (Page 72)

70 push to talk
3 Press and release the PTT Key to alert the
individual.
Your phone plays the PTT “Outgoing Alert” tone
and displays Alerting. If the wireless number you
entered is included in your PTT Contact List, the
contact name will replace the wireless number
entered on the screen when the alert is initiated.
If the called party answers the alert, your phone
displays Listening to, and you will hear the called
party speaking. If the called party chooses to
ignore the alert, or if the phone is unavailable to
accept a PTT call, you will see Unavailable
When the called party is finished speaking, your
phone plays the “Floor Available” tone and display
Connected to.
4 Press and hold the PTT Key to talk.
5 Release the PTT Key when finished speaking.
This allows the called party to reply.
6 Press the Power/End Key (
%
) to end the call.
temporary group calls
You can set up a temporary group call to a set of PTT
contacts already in your PTT contact list. A temporary
group is a new group that you define for a single call
and is not stored as a group in the PTT contact list.
Note: To make PTT calls, you must set PTT Mode to On
(see page 64).
1 Press the PTT Key to access the PTT Contact List.
2 Press the Right Soft Key (
:
) (Options).
3 Select Temp PTT Group and press the Center Select
Key (
M
) (OK).
4 Press the Center Select Key (
M
) (ADD) to add new
members.