MITSUBISHI ELECTRIC WS-48513 - Manual (Page 81)

80 81
To turn PIP/POP off, wait at least 10 seconds, and press
PIP/POP. The next time you activate PIP/POP, the last
used PIP/POP option will be displayed
Picture-In-Picture (PIP) and Picture-Outside-Picture
(POP) features allow you to view programming in different
ways. While watching the main screen, you can display
programs from other channels and other inputs. You can
display a single PIP, side-by-side pictures, three POPs, or
nine POPs Activating the PIP and POP
Press PIP/POP to activate the PIP/POP option. With each
press of the PIP/POP button on the TV remote control
(within 3 seconds of each other), the PIP/POP will cycle
through the following display options:
• POP
side-by-side
pictures
• 3 POP
• 9 POP
• PIP large
• PIP small
• PIP/POP: off
Operation of PIP and POP
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through memorized
channels on Ant-A and Ant-B.
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture.
Moving PIP Image
If no menus are on the screen, press ADJUST , , or
to move the PIP display anywhere on the main screen.
Automatic POP Switching
When automatic POP switching is active, the TV will
cycle through memorized channels on Ant-A or Ant-B or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic POP
switching.
Selecting POP “Live” Image
Press ADJUST , , or to select a different POP
“live” image (automatic POP switching must be paused.)
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a “live” image.
MAIN
PICTURE Side-by-Side
��������� ��������������
��������
����������
����������
����
IMPORTANT
Side-by-Side cannot show the same channel
or device on both sides.
ANT-B is not available as the PIP, POP or Side-
by-Side while ANT-A is the main image.
DVI devices are not available as PIP or POP or
Side-by-Side but can be the main picture.
PIP/POP is not compatible with signals from
ANT-DTV, IEEE 1394 or Memory Cards.
MAIN
PICTURE
POP 1
POP 2
POP 3
MAIN
PICTURE
POP 1 POP 2 POP 3
POP 4 POP 5 POP 6
POP 7 POP 8 POP 9
� �� � ��� ����� ��� �� ��
� �������
� ����� � ��
���� � ��� �
� ���