MITSUBISHI ELECTRIC WS-48513 - Manual (Page 39)

38 39
Edit NetCommand ® , Adding an A/V Receiver, continued
Monitor Out to AVR Screen
Figure 11
Use this screen if you connected Audio 2 Out or Audio
Video 1 Out from Monitor Output of the TV to the A/V
Receiver. Select “Audio 2” or “Audio Video 1” on this
screen and then select the input on the A/V Receiver
connected to Monitor Out.
Finish Screen
Figure 12
To finalize your selections and complete the A/V
Receiver setup, select Finish from the Finish screen.
Note: To assign learned inputs to devices, select
the Edit button to display the Edit NetCommand
menu.
Name Screen
Figure 10
The Name screen allows you to change the default name
for the A/V Receiver to a custom name of up to eight
characters (including a blank space), selecting from
letters, numbers, and nine different characters. Using the
TV’s remote, press ADJUST or to select each letter,
then press ENT(er) to move to the next position. Press
CANCEL to delete the current letter and move back one
character position. When in the first position, the CANCEL
button will return the name to the default name.
Figure 10. Name screen
Figure 11. Monitor Out to AVR screen
Figure 12. Finish screen
Audio 2 is the default selection and allows an analog
VCR to be connected directly to Audio Video 1 out for
recordings. If Audio Video 1 is chosen, then the VCR
must be directly connected to VCR record outputs on the
A/V Receiver, to be able to record Ant-DTV programs.