MITSUBISHI ELECTRIC WS-48513 - Manual (Page 69)

68 69
A/V Setting Descriptions: Video
Video Settings
◊ Contrast
Provides a slider to adjust the white-to-black
level. Low contrast shows a variety of shades
in darker images, while high contrast shows
darker images more uniformly black and
makes colors appear more vibrant. In most
home lighting situations, a medium contrast
looks best. High contrast is good for brightly
lit environments.
◊ Brightness
Provides a slider to adjust the overall
brightness of the picture.
◊ Sharpness
Provides a slider to adjust the detail and clarity.
◊ Color
Provides a slider to adjust the color intensity.
◊ Tint
Provides a slider to adjust the proportion of
red to green.
◊ Color Temp (Color Temperature)
Allows you to adjust how white images are
displayed. Your choices are:
• Low 6500K or Low (for DTV): White images will
have a warm cast to them. This adjustment is
an average and can vary due to ambient room
lighting, video scene brightness and the TV’s
age. The Low 6500K represents the 6500K
industry standard for NTSC (non-DTV) pictures.
• Medium: White images will be balanced between
the Low (warm) and High (cool) settings.
• High: White images will have a cool cast to them.
This setting may provide the most realistic
picture under bright lighting.
◊ Video Noise
Use to reduce minor noise (graininess) in
the broadcast received on Ant-A and Ant-B
or Inputs 1-3 and Component 1 and 2. Use
standard with good quality signals.
◊ Film Mode - On or Off
On is the automatic setting and will
automatically detect and apply film decoding
correction for signals that originated on 24
frames per second film cameras and then
were converted for broadcast to 30 frames per
second video.
When the original signals originated on 30
frames per second video cameras, the On
setting will automatically apply video decoding,
the same as used with the Off setting. Try
the Off setting when the TV seems to have
difficulties and adds too many jagged edges to
the images.
Film Mode is not effective for progressive scan (480p)
devices, and high definition signals.
◊ DefinEdge VSM
Selected image outlines are emphasized,
resulting in sharper images, when On. When
turned Off, the velocity scanning modulation
and edge enhancer functions are prevented.
The default is On.
NOTE: A slider will display on-screen for most
settings. When the slider is displayed it has a
numeric value, where 63 is the maximum, 31 is
the mid-point and 0 is the minimum.