MITSUBISHI ELECTRIC WS-48513 - Manual (Page 77)

76 77
Memory Card Playback
Memory Card Slots
Inserting a Memory Card
1. Insert a card into a matching card slot on the front of
the TV. Be sure to use the correct card slot. Card 1
will accept MultiMediaCard™ and SD Memory Card.
Card 2 will accept SmartMedia™. Card 3 will accept
CompactFlash®. Card 4 will accept M
EMORY S TICK ™.
Cards up to 128mb, with a file format of FAT 16 (block
size = 1024 or 2048) are supported.
Normally the label side should be up, but if the card
does not fit, try turning the card over and insert again.
When properly inserted, the light next to the slot will
light up.
2. Press DEVICE on the remote control to display the
Device Selection Menu and then select the correct card
slot from the list, using ADJUST , , or , then
press ENT(er).
3. The Memory Card screen (figure 3) will automatically
display. Use the AUDIO button to switch from JPEG
Picture Slideshow setup to MP3 or WMA7 Audio
Playlist setup or use the VIDEO button on the remote
to switch from the MP3 or WMA Audio Playlist setup to
JPEG Picture Slideshow setup.
Don’t pull the Memory Card out while it is playing.
4. On the remote control, press:
PLAY: to start the slideshow or play audio.
GUIDE: to display the JPEG Thumbnail menu or
Audio track playlist.
DEVICE
MENU:
to display the Media Setup menu (Figure 6).
Remote Control Buttons for Controlling the Playback
For JPEG Pictures Slideshow:
PLAY: begins or resumes slideshow playback
PAUSE: pauses or resumes playback while in the
automatic advance mode.
FF: skips to the next slide.
REW: returns to the previous slide.
FORMAT: single press rotates the slide 90˚. Multiple
press continues to rotate the slide.
STOP: Stop slideshow, return to Memory Card screen.
For MP3 or WMA Audio Playback
PLAY: begins or resumes playlist playback.
PAUSE: pauses or resumes playback.
FF: skips to the next track/song.
REW: skips to the previous track/song.
STOP: Stop playback and returns to Memory Card
screen.
Using the Picture Thumbnail Menu or Audio Menu
For JPEG Picture Thumbnail Menu:
Figure 4
1. Press GUIDE on the remote to display the JPEG picture
Thumbnail menu.
2. Press ADJUST , , or to move the highlight to
different images (CH up/down will change pages of the
Thumbnail menu). Use REW to go to the first slide and
FF to go to the last slide on the page.
3. Press FORMAT to rotate the selected image 90˚
(pressing FORMAT four times will rotate the image
completely around to the original position).
4. Press PLAY to begin playback of the Slideshow from
the selected image. The Thumbnail menu will be taken
down.
��� ���������� ����� �����
��� ����������� ����� ������
�� ��������� ���� ���� �� ��
������ ����� ������ �����
��� ��������� ����� ������
Figure 3. Memory Card screen
Figure 4. JPEG Thumbnails
Warning: Some memory cards available on the market are not properly certified for use by the Card Reader.
If you experience problems with the reading of your file, please transfer your files to a card from a different
manufacturer.