60 61 time menu: setting the clock, manual or auto, Setting the clock (auto), Time zone – MITSUBISHI ELECTRIC WS-48513 User Manual
Page 60: Daylight savings time, Setting the clock (manual), Set time, Set day, Time menu
60
61
Time Menu: Setting the Clock, Manual or Auto
Setting the Clock (Auto)
Figure 12
The Clock Setting (Auto) will automatically set the day
and time using Extended Data Service (XDS) time data.
This data is automatically retrieved from a PBS channel
or other channel carrying this service when received on
Ant-A or Ant-B. Be aware that some channels may send
incorrect time information, this is not a defect in the TV.
Time Zone
When Auto has been selected for the Clock Setting, you
need to select the correct time zone. Press ADJUST
or to select the time zone (Atlantic, Eastern, Central,
Mountain, Pacific, Alaska or Hawaii) for your area. Then
press ADJUST to move to the Daylight Savings Time
option.
Daylight Savings Time
When Auto has been selected for the Clock Setting, you
need to select the Daylight Savings Time (DST) option that
your state uses. Press ADJUST or to select Applies
if your state or area uses DST, or Ignore if your state or
area does not use DST.
The clock time and day will be set automatically after
tuning to a channel carrying the Extended Data Service
(XDS) time data (usually your local PBS channel).
Figure 12. Time Menu, Auto Clock Setting
Setting the Clock (Manual)
Figure 11
For the manual clock setting, select the current time,
including AM or PM and the day. Hours and minutes
are set separately.
Set Time
When Manual has been selected for the clock setting,
you need to set the time.
Press ADJUST or to slowly select the hour or
press and hold ADJUST or to quickly select the
hour. Press ENT(er) to confirm the hour.
Then press ADJUST to move to the minutes options
and press ADJUST or to select minutes then press
ENT(er) to confirm. You may then press ADJUST to
select AM or PM and ENT(er) to confirm.
Set Day
When Manual has been selected for the Clock Setting,
you need to select the current day of the week. Press
ADJUST or to select the correct day.
Figure 11. Time Menu, Manual Clock Setting
Time Menu
Select Time to perform the functions listed below.