MITSUBISHI ELECTRIC WS-48513 - Manual (Page 58)

58 59
Antenna Menu
Figure 9
Select Antenna to perform the functions listed below.
Memorize
For Antenna A or Antenna B
Select either Air (when used with an indoor/outdoor
antenna) or Cable (when used with direct cable) then
press ENT(er) to start the automatic channel memorization
process.
For Antenna DTV
Select Air when used with an indoor/outdoor antenna.
Select Cable or Cable (HRC) when used with Direct cable.
There are three types of Cable systems: Standard, IRC
and HRC. To memorize Standard or IRC, select Cable; to
memorize HRC, select Cable (HRC).
Check with your Cable company to determine which type
of Cable system they use. If your cable company cannot
advise you, select Cable.
To stop the automatic channel memorization process,
press CANCEL. Channels memorized before you pressed
CANCEL are retained in memory.
After memorizing channels, the channels in the memory
can be accessed in ascending or descending order or by
pressing CH or .
Antenna Menu
The following Antenna Menu options are available for use on Antenna A, Antenna B or Antenna DTV. You can memorize
channels, add or delete channels, and add channels to an SQV (Super Quick View™) list. For Antenna A and Anenna B,
you can name channels.
Antenna Menu: Antenna, Memorize Channels, Channel,
Memory and Name
Channel
For additional Channel editing, press ADJUST or
to select the channel or press CH or for channels
already in memory.
On Antenna DTV, when the broadcaster has sent a virtual
channel number, the virtual channel number is shown
in the text box and the original digital channel is shown
below on-screen, as a reference.
Memory
After the available channels have been memorized with
Memorize, weaker channels viewed with Antenna A
or Antenna B can be added. Unwanted channels for
Antenna A, Antenna B, or Antenna DTV can also be
deleted. Press CH or on the remote control to see
the channels in memory. Press ADJUST or to select
Added or Deleted for the channel shown in the Channel
number box.
Name
Channels shown on Antenna A or Antenna B can be
named (up to four characters). After you enter a name, it
will appear on the TV screen, next to the channel number.
1. Press ADJUST or to select each letter.
2. Press ENT(er) to set the letter and move to the
next letter position.
3. Press CANCEL to move back one position.
Channels on Antenna DTV are automatically named, if the
broadcaster sends the information
Figure 9. Antenna Menu