MITSUBISHI ELECTRIC WS-48513 - Manual (Page 50)

50 51
Device Selection Menu
Audio Section
When a NetCommand pre-memorized or learned IR
controlled A/V Receiver, or HAVi amplifier has been
connected to the TV and added to NetCommand Setup,
an icon for this device will appear in the audio section.
Press AUDIO to change navigation to the audio section.
Then press ADJUST , , or to select the TV
speakers icon or the A/V Receiver icon. Press ENT(er) to
change the audio selection. Press DEVICE to return the
navigation to the Device Section.
Device Section
When the Device Section menu is displayed, the Device or
Input you are currently viewing shows a gold-colored icon.
To select another device or input, press ADJUST , ,
or on the TV’s remote to move the highlight among the
devices. Press ENT(er) to select the device you would
like to view and hear. The TV inputs are automatically
changed. If NetCommand is set up, the inputs on
compatible A/V Receivers are automatically changed at
the same time.
Power On/Off Devices
Some devices will power On automatically when you
select to use the device. These devices will power Off
automatically when you turn Off the TV. For devices that
do not power On or Off automatically display the Device
Selection menu, ADJUST or to highlight the device
icon and press POWER on the remote control. For the
A/V Receiver, press AUDIO to move the navigation to the
Audio Section. Highlight the A/V Receiver icon and press
POWER. If you press POWER on the remote control when
the Device Selection menu is not displayed, the TV will
turn Off.
When you press DEVICE on the TV’s remote control, the Device Selection menu (Figure 1) displays. When
NetCommand® has not been setup, the Device Selection menu allows you to select an input for viewing. When
NetCommand is setup the Device Selection menu allows you to select the device for viewing, select audio from the TV
speakers or A/V Receiver, power compatible devices On or Off, and verify the destination of signals.
Connection Section
The Connection Section shows the other devices that
are currently connected to the device highlighted in the
Device Section.
For example, if the Digital VHS (D-VHS) is currently
recording from Ant-DTV, when you move the highlight
to the Ant-DTV icon, the D-VHS icon will appear in the
Connection Section. This icon will disappear when you
move the highlight to another icon.
Video Section
The TV icon shows the destination for the device
highlighted in the Device Section.
Only devices that were designed by their manufacturers to respond to separate On and Off
remote control signals will be able to turn On automatically. Not all manufacturers provide this
ability for their products.
IMPORTANT
Main Picture
Audio
Section
Connection Section
Device
Section
Video
Section
Figure 1. Device Selection Menu with NetCommand