Mercedes-Benz CS1000 - Manual (Page 7)

Mercedes Benz Code Scanner CS1000 OB15-11
7
S
CANNER
F
EATURES
1. Keypad
SYSTEM Select vehicle control system for code reading and erasing.
READ Read fault codes.
NEXT 2. View next fault code. (If more than one fault code present)
CLEAR Clear fault codes.
2. Screen Symbols
Control systems select.
. . . . ....
Scanner is Reading or Clearing fault code
U Indicate fault code list number to use.
I
Indicate fault code.
0000 Four 0s flashing together.
Connection fault or vehicle not equipped with this system
»
Check that the Ignition key is on or the Engine is running.
»
Check power requirement to scanner (10.5 to 14.5 Volts)
»
Check the in-line fuse on the Yellow probe wire.
»
Check for correct connection to the Vehicle Diagnostic Connector.
»
Check for short circuit in the Vehicle Diagnostic Connector.
»
Check that this memory cartridge is available for this vehicle system.
»
Check that vehicle system requested for test is fitted to this vehicle.