Mercedes-Benz CS1000 - Manual (Page 63)

1
ANALOG CODES
CS1000 Code Scanner OB15-11
DTC Readout Possible Cause of Faults
63
19 ASR/ETS hydraulic unit, right rear axle solenoid valve(hold)
20 ASR/ETS hydraulic unit, right rear axle solenoid valve (release)
21 ASR/ETS hydraulic unit, switchover/solenoid valve
22 ASR/ETS hydraulic unit, inlet solenoid valve
23 ASR only: ASR system pressure too low
24 ASR/ETS hydraulic unit, high-pressure/return pump relay
27 Stop lamp switch
28 Battery voltage too low, circuit 87
29 ETS only Circuit 30, volts supply
30 ASR only CAN date bus to EA/CC/ISC control module, interrupted
31 ASR only CAN communication with LH-SFI control module Left LH-SFI control module
right LH-SFI control module faulty CAN communication with engine control module
faulty
32 ASR only CAN communication with DI or left and right DI control module, faulty
33 ASR only CAN communication faulty in general
34 ETS only Brakes overheated
35 Model 129.076,140.04/05/07 Master brake cylinder switchover valve
36 Model 129.076,140.04/05/07 ASR lateral acceleration sensor, open circuit
37 Model 129.076,140.04/05/07 ASR lateral acceleration sensor, illogical
38 ETS only EST/SPS control module not identify the software (not coded)
39 Model 140/210 ETS/SPS or ASR/SPS control module
40 Model 140 SPS P-valve
41 Model 140/210 ASR/SPS or ETS/SPS control module