Mercedes-Benz CS1000 - Manual (Page 159)

2 Transmission Module
CS1000 Code Scanner OB15-12
Copyright © 1998 Baum Tools Unlimited Inc. All rights reserved.
Reproduction in whole or in part in any form or medium without express written permission of Baum Tools Unlimited Inc. is prohibited.
159
E 2
U 2
# ! #! # 9$"& # ! #! # 9$"& # ! #! # 9$"& # ! #! # 9$"&
Models Model Years
129 140 1993-96
Connect wires of Scanner as follows
Scanner Data Link Connector 38-pin
Yellow Socket 10
Black Socket 1
Red Socket 3
Fault Code Table
DTC Readout Possible Cause of Failure
1 No fault found
2 Engine control module (N3/4) does not match TCM
3 Transmission overload protection switch 4th/5th gear defective
4 CAN data line from EA/CC/ISC control module (N4/1) signal distorted
5 CAN data line from DI control module (N1/3) or HFM control module signal distorted
6 CAN data line signal distorted
7 Valve control valve block (Y3/1y2), open circuit or TCM (N15/1) defective
8 Automatic Transmission Control Module (TCM) (N15/1) defective
9 Valve control valve block (Y3/1y2)
10 Valve control valve block (Y3/1y2), short circuit