Mercedes-Benz CS1000 - Manual (Page 15)

Mercedes Benz Code Scanner CS1000 OB15-11
15
3. System Selection
1 All analog impulse fault code systems. If unsure, start with this system.
2 Digital type SRS (1 or 2 airbag) system as follows:
1. W202 © class). 2. W129 / W140 1993 - 1996
3 Digital type SRS (4 airbags)
1. W210 (E class). 2. W129 / W140 1996 1998
4 Digital type LH-SFI for the Current fault codes. 1991-1993
5 Digital type LH-SFI for the Stored fault codes. 1991-1993
6 Digital type HFM-SFI for the Current fault codes. 1993-1997
Digital type PMS for the Current fault codes. 1993-1996
7 Digital type HFM-SFI for the Stored fault codes. 1993-1997
Digital type PMS for the Stored fault codes. 1993-1996
8 Digital type DM for the Current fault codes. 1991-1996
9 Digital type DM for the Stored fault codes. 1991-1996
10 Digital type DM for the Registered fault codes. 1991-1996
11 Digital type ME-SFI for the Current fault codes. 1996-1998
12 Digital type ME-SFI for the Stored fault codes. 1996-1998
Press the SYSTEM key to scroll to display from 1 to 2 system etc....
SYSTEM
ANALOG TEST PROCEDURES
1. Ignition in the KOEO position (Key On Engine Off)
2. Choose system 1
3. Place test probe (yellow) in pin-out for specific analog test.
DIGITAL TEST PROCEDURE
1. Ignition in the KOEO position (Key On Engine Off)
2. Choose system 2 thru 12
3. Place test probe (yellow) in pin-out for specific analog test.
4. If any system does not respond, test it using the Analog Test Procedure.
*Some early LH Injection and Diagnostic Module systems may not respond to the digital test.