Mercedes-Benz CS1000 - Manual (Page 114)

1
ANALOG CODES
CS1000 Code Scanner
OB15-11
114
""! #!
""! #!
""! #!
""! #!
Models Model Years
124 129 1990-93
Connect wires of Scanner as follows (124, 129.061/066)
Scanner Data Link Connector 8 or 16-pin
Yellow Socket 6
Black Socket 1
Red Battery (+)
Connect wires of Scanner as follows (129.067/076)
Scanner Data link connector 38-pin
Yellow Socket 30
Black Socket 1
Red Socket 3
FAULT CODE TABLE
DTC Readout Possible Cause of Failure
1 No fault found
2 SRS Control unit self test failure
3 Driver Airbag squib
4 Front passenger Airbag squib
5 Airbag/ETR, Driver seat beat buckle switch
6 Front passenger seat belt buckle switch (ETR)
7 Front passenger Airbag resistor
8 Voltage supply interrupted
9 SRS Warning Lamp (with flashing SRS warning lamp Impulse counter scan tool button
held too little time to read out the DTC memory or too long to erase DTC codes. Reread
codes.)
10 SRS Control unit activated.