Minicom Advanced Systems CAT5 - Manual (Page 35)

USER GUIDE
34
The OSD version number
To verify the OSD version number:
1. Open the Smart CAT5 Switch Update program.
2. In the Switch Unit box, check the OSD option. See Figure 26.
3. Click . The version number appears in the Switch box.
The H/W Version button is grayed out, as there is no hardware relevant to the OSD.
The Smart CAT5 Manager version number
To verify the Smart CAT5 version number:
1. Open the Smart CAT5 Switch Update program.
2. In the Switch Unit box, check the Smart CAT5 Manager option.
3. Click . The firmware version number appears in the Switch
Unit box.
4. Click . The hardware version number appears in the Switch
Unit box.
Verifying the RICC version number
Before you can check a RICC, you must uncheck the Switch Unit box options.
To verify the RICC version number:
1. Open the Smart CAT5 Switch Update program.
2. Check one or more or all of the RICCs.
3. Click . The firmware version number appears after the RICC
number.
4. Click . The hardware version number appears after the RICC
number.
When “Not responding” appears, there is no computer connected, or it is switched
off.
59. Obtaining new firmware
Download the latest firmware for your system from www.minicom.com