Minicom Advanced Systems CAT5 - Manual (Page 16)

SMART CAT5 SWITCH
15
22. The General settings
With the GENERAL line highlighted, press Enter. The General settings window
appears see Figure 13.
Figure 13 The General Settings window
From this window you can do the following:
Security
The OSD comes with an advanced password security system that contains 3 different
security levels. Each security level has different access rights to the system.
These levels are as follows:
Administrator (Status A)
The Administrator can:
· Set and modify all Passwords and security profiles
· Fully access any computer
· Use all OSD functions
Supervisor (Status S)
The Supervisor can:
· Fully access any computer
· Access the following OSD functions only –F4 Scan, F5 Tune and F6 Moving
the Confirmation label.
User (Status U)
There are 6 different Users in the Smart CAT5 system. Each User has a Profile set by
the Administrator that defines the access level to different computers. There are 3
different access levels; these are explained on page 20.