Minicom Advanced Systems CAT5 - Manual (Page 31)

USER GUIDE
30
48. Loading a saved configuration
To load a saved configuration:
From the File menu choose Open.
49. Reminder!
All changes done with the Control software are only reflected in the OSD AFTER
pressing .
50. The factory default settings
To revert to the factory default settings:
On the toolbar press .
There is no need to press .
51. Password protection
When the Smart CAT5 system is password protected, the Control software behaves in
exactly the same way as the OSD. You must type in the required password to access
the Control software. The access you gain depends on the security status – exactly as
with the OSD.
To change the security access, close and reopen the Control software, and type in the
different password.
Administrator (Status A)
The Administrator can:
· Set and modify all Passwords and security profiles
· Fully access any computer
· Use all functions
Supervisor (Status S)
The Supervisor can:
· Fully access any computer
· Scan computers.