Minicom Advanced Systems CAT5 - Manual (Page 21)

USER GUIDE
20
2. Place the cursor over one of the 3 digits and type a new number. Enter a leading
zero where necessary. For example, type 040 for 40 seconds.
Typing 999 in the LBL column displays the label continuously. Typing 000 – the
label will not appear.
Typing 999 in the T/O column disables the Timeout function. Typing 000 – the
Timeout function works immediately.
Typing 999 in the SCN column displays the screen for 999 seconds. Typing 000 –
the computer screen is skipped.
26. Users
In the Settings window navigate to the Users line and press Enter. The Users settings
window appears see Figure 16.
Figure 16 The Users settings window
There are 3 different access levels. These are:
· Y – Full access to a particular computer. Plus access to the F4, F5 and F6
OSD functions
· V –Viewing access only, to a particular computer (No keyboard/mouse
functionality)
· N – No access to a particular computer – A TIMEOUT label appears if access
is attempted
To give each user the desired access level:
1. Navigate to the desired computer line and User.
2. Toggle between the options using the Spacebar.