Rack mounting the smart cat5, User guide 10, Figure 8 connecting the l-shaped bracket – Minicom Advanced Systems CAT5 User Manual
Page 11
USER GUIDE
10
Circuit overloading
When connecting the equipment to the supply circuit, consider the effect that
overloading of circuits might have on over-current protection and supply wiring.
Reliable earthing of rack-mounted equipment should be maintained. Give attention to
supply connections other than direct connections to the branch circuit (e.g. use of
power strips).
13. Rack mounting the Smart CAT5
Length of the screws used for connection of the bracket to the Smart CAT5 unit shall
not exceed 5 mm.
Use the L-shaped brackets and screws provided to mount the Smart CAT5 on a server
rack as illustrated below.
Insert
screws to
connect to
rack
Insert screws to connect
to Switch side panel
POWER
100-250 VAC 50/60 Hz
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
9
COMPUTER
w
w
w
.m
in
ico
m
.c
om
Figure 8 Connecting the L-shaped bracket