Sanyo Scp 8100 - Manual (Page 54)

1. Press to access the main menu.
2. Highlight Phone Book and press .
3. Highlight Speed Dial #s and press .
4. To select a corresponding Speed Dial number from 2-9,
highlight an unassigned number and press .
5. Highlight the entry from the list and press .
6. Highlight the phone number you want to set as a Speed Dial
and press .
To use Speed Dial:
1. From the Standby mode, press and hold the appropriate key
that corresponds to the memory location for approximately
two seconds.
– or –
From the Standby mode, press the appropriate key and
press
.
The display confirms that the number has been dialed when it
shows Connecting.
My PCS Phone Number
To display your phone number:
1. Press to access the main menu.
2. Highlight Phone Book and press .
3. Highlight My Phone# and press .
Section 2: Understanding Your PCS Phone
2G: Using the Internal Phone Book 93
Using Different Dialing Methods
Prepend Dialing
Prepend dialing allows you to alter a phone number in your
Phone Book by adding additional numbers. For example, if your
Internal Phone Book entry was entered without an area code
and you are out of town, you can prepend that entry with the
appropriate area code.
1. Highlight the phone number stored in Phone Book entry or
call history using one of the previously described methods.
2. Press (right softkey) to display the menu options.
3. Highlight Prepend and press .
4. Enter the digits you want to prepend.
5. Press .
– or –
Press
to display the menu options, highlight Call, and
press .
Using Speed Dial
With this feature you can dial Internal Phone Book entries with
one key press for locations 2-9. Save your memory locations 2-9
for speed dialing or your most commonly used phone numbers.
Speed Dial numbers must be stored in your Phone Book to use
this feature.
To store a Speed Dial number:
1. Press of the Navigation key.
2. Highlight your desired entry by scrolling through the phone
book list and press .
3. Highlight the phone number you want to set as a Speed Dial,
and press (right softkey).
4. Highlight Set Speed Dial and press .
5. Highlight an unassigned number and press .
– or –
Options
Options
Section 2: Understanding Your PCS Phone
92 2G: Using the Internal Phone Book