Dg-30 digital keypad, Auxiliary reader, Gianni industries, inc – Gianni Industries DG-30 User Manual

Page 2: Connecting diagram

1 2 3

Auxiliary Reader

(Wiegand 26 or

34-bit Format)

To follow the

precedent of

Group 1 contacts

Tamper switch
contact output

(Dry contact)

Tamper

Switch

Push Exit Button

FAIL-SAFE

LOCKING DEVICE

Power Supply

Re-set of all

system parameter

Contact door reed switch

This reed switch is used to reset the re-

locking time to 0 second when the door is
moved. (Using N.O. contact in case of
door closed, changeover to N.C. When
door is moved)

GIANNI INDUSTRIES, INC.

The products are manufactured under an ISO
9 0 0 1

Q C

0 8 0 0 0 0

C e r t i f i e d

Q u a l i t y

Management Program environment back its
product quality, performance and commitment
to customer satisfaction.

Connecting Diagram

Auxiliary reader

The auxiliary reader must not be further than 50 meters from

the DG-30. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG.

auxiliary

Split of units for DG-30 and

reader

in ranging up to 50 M bring out the friendly system device for
low cost but high security with anti-tampering as well as
convenience and reliability.

Dimension:88(L)x44(W)x16(D)mm

GEMPROX-H

GEMPROX-E

GEMPROX-26M

125 KHz,Wiegand 26~37-bit
format output

125 KHz,Wiegand 26-bit
format output

13.56 MHz,Wiegand 26-bit
format output, Mifare 1
compatible

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw

DG-30 Digital Keypad