Gianni Industries GEM DK-100 - Manual

GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-DK-100 Ver. C Published on 2008.05.05
The products are manufactured under an ISO
9 0 0 1
Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Statement
DK-100 DK-100-S
Features
Warranty
Specifications
DK-100
Stand Alone Digital Keypad
Blue back light keypad, easy to recognize in the dark.
ANSI standard size, convenience for mortise installation
Allows up to 99 PIN codes
Epoxy potting, water-proof design
Dual relays operate simultaneously, able to control
locks and other access control system
Cutting spare delay time after door closes for
anti-tailgating
LED display with audible indication
EPROM: Non-volatile memory, System will retain all
programs and codes after breaks down power
Metal casting housing with special screws
The DK-100 is a dual relay digital code-operated for access
control keypad with up to 99 individual user PINs, user access
PINs ensure that all functions controlled to authorized
persons only. The door reed switch Input is used to time out
the timer when door is moved for anti-tailgating. It's designed
to mount on ANSI standard-single-gang electric wall box or on
the surface of an interior or exterior wall.
Logical memory can prevents unauthorized persons
from gaining PIN code entry by trial and error, The system will
shut down for 60 seconds while 30 codes of incorrectly Master
Codes enrolled or PIN codes attempted
None beeper signal
of keypad activations . Metal die casting housing with vandal
resistant screws to seize every security measures of the unit.
)
(
Operating Voltage: 12~24 Vdc
Current Draw: Average 35mA, Peak 130mA @ 12Vdc
Input: request-to-exit, time out reed switch contact
Output: Dual relays, N.O. / N.C./ Com. Output (free voltage
contact)
Relays Electric Current: 2A@30Vdc, 0.4A @ 120Vac
Dual relays operate simultaneously:
Strike Time: 1~99 seconds
Strike mode: Access Timer or Latch
Memory Volume: 99 slots
A m b i e n t H u m i d i t y : 5 ~ 9 5 % r e l a t i v e h u m i d i t y n o n -
condensing
Factory Master Code: 12345
Invalid PIN Lock-out: The system will shut down for 60
seconds while 30 codes of incorrectly Master Codes
enrolled or PIN codes attempted)None beeper signal
of keypad activations(.
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
Operating Temperature: -20~+70C
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw