Sanding/finishing – Grizzly G0694 User Manual

Page 34

-32-

Model G0694 (Mfg. Since 10/09)

Sanding/finishing

after the turning operations are complete, the
workpiece can be sanded and finished before
removing it from the lathe (see

figure 38 for an

example).

figure 38. typical sanding operation.

Note: Whenever sanding or finishing, move the
tool rest holder out of the way to increase per-
sonal safety and gain adequate working room.

Wrapping the sandpa-

per completely around

the workpiece could pull

your hands into the mov-

ing workpiece and cause

serious injury. Never

wrap sandpaper or finish-

ing materials completely

around the workpiece.

Sandpaper

Workpiece