Grizzly G0694 - Manual (Page 20)

-18-
Model G0694 (Mfg. Since 10/09)
SEcTION 4: OPERATIONS
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Loose hair and clothing
could get caught in the
lathe and cause serious
personal injury. Keep
loose clothing and long
hair away from moving
parts of lathe.
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear a face shield and
respirator when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REc-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
A. ON Button: starts the spindle rotation.
B. Emergency STOP Button: turns the spindle
rotation OFF .
c. Speed Dial: adjusts the spindle speed from
low to high within the range governed by the
pulley belt position.
D. fWD/REV Switch: toggles the spindle direc-
tion between clockwise or counterclockwise.
E. RPM Digital Readout: indicates the spindle
speed in rpM (rotations per minute).
Basic controls
figure 11. Control panel.
a
B
C
d
e
see figure 11 and refer to the list of controls
below to familiarize yourself with the lathe con-
trols. you will find that understanding the names
and descriptions of the controls is useful when
reading this operations section.