GoVideo DVP950 - Manual (Page 43)

43
Basic
Set
u
p
G
etting
Sta
rted
Ne
twork
Ope
ra
tions
DVD
Ope
rations
Ad
vanc
e
d
Se
tti
n
gs
He
lp
:: Video Setup
The Video menu allows you to set your preferred aspect ratio for
DVD movies and specify your video connection method.
1 From Stop mode, press SETUP.
2 Select Video and press ENTER.
3 Use the / keys to select each of the following:
TV Aspect
Sets your preferred format for DVD movies to match the shape of
your television screen.
• Select TV Aspect, and then use the / keys to select:
Fullscreen
(Default) Select if you have a standard 4:3 television and prefer to
watch full-screen versions of DVD movies (if available).
Letterbox
Select if you have a standard 4:3 television and prefer to watch
widescreen versions of DVD movies (if available). Movies will
display in letterbox format; i.e., black bars will appear above and
below the picture.
Widescreen
Select if you have a widescreen 16:9 television.
Video Output
Sets the Video Output to match the method you used to connect the
DVD player to your TV.
• Select Video Out, and then use the / keys to select:
Composite
(Default) Select if you connected the DVD player to your TV
using the Composite Video output.
S-Video
Select if you connected the DVD player to your TV using the S-
Video output.
Component
Select if you connected the DVD player to your TV using the
Component Video output.
Progressive
Select if you connected the DVD player to your TV using the Pro-
gressive Video output.
• Click OK to test the Video Output setting. “Testing Please Wait” is
displayed and the new Video Output settings are applied tempo-
rarily.
• If you are satisfied with the Video Output test, select Apply and
press ENTER.
• If you are not satisfied with the Video Output test, select Cancel
and press ENTER.
4 Select OK and press ENTER.
5 Press SETUP or RETURN to exit the Setup menu.
Video Setup Menu