Grizzly VS MILLING MACHINE G0669X - Manual (Page 30)

-28-
g0669X precision 10" x 54" Vs Milling Machine
Rotating the Head
1. disConneCt the MiLL FroM poWer!
2. Loosen the four rotation locking bolts shown
in figure 32.
3. With one hand helping to support the weight
of the head, slowly turn the rotation bolt.
Note: Turn the rotation bolt clockwise to
move the head to the right and counterclock-
wise to move it to the left.
4. re-tighten the locking bolts to secure the
head in place.
Ram Movement
Always lock the ram firmly in place after
adjusting its position. If the ram and head
move unexpectedly during milling operations,
the cutter could bind with the workpiece and
break apart, resulting in personal injury or
property damage.
the ram moves back and forth horizontally, and
rotates 360° around the column.
tools Needed Qty
Wrench 19mm ................................................... 1
Moving the Ram forward/backward
1. disConneCt the MiLL FroM poWer!
2. Loosen the two horizontal lock bolts shown in
figure 33.
3. slowly turn the horizontal drive bolt to move
the ram to the desired position.
4. re-tighten the horizontal lock bolts to secure
the ram in place.
figure 32. head rotation bolts.
Locking Bolts
rotation
Bolt
figure 33. ram horizontal lock bolts and drive
bolt.
Lock Bolts
drive Bolt