Gateway MAN FX510 User Manual
Page 57
www.gateway.com
51
3
If you are installing a new drive, go to
- OR -
If you are replacing an existing drive, disconnect the
cables from the drive, noting their locations and
orientation. You will reconnect the cables after you
install the new drive.
4
Remove the thumbscrew from the diskette drive.
5
Slide the drive release latch back to unlock the drive,
then slide the drive forward and out of the drive bay.
6
Slide the new drive into the drive bay.
7
Slide the drive release latch forward to lock the drive
into place. You do not need to replace the thumbscrew
because it was originally installed for shipping
purposes.
8
Reconnect the drive cables using your notes from
. If you are installing a new drive, follow the
manufacturer’s instructions.
Important
The color and shape of your replacement drive's front cover may
vary from your original drive.
Thumbscrew
8512066.book Page 51 Tuesday, January 16, 2007 11:02 AM
- E-2300 (134 pages)
- E-4100 (144 pages)
- ALR 7300 (138 pages)
- E-4650 (134 pages)
- E-6300 (136 pages)
- E-9232T (96 pages)
- 610 (108 pages)
- ProfileTM 5 (292 pages)
- Profile 6 (130 pages)
- E SERIES E-6000 (190 pages)
- SZSL95IN0XXXXXXXX (132 pages)
- 8400 (34 pages)
- DX4800 (94 pages)
- GR380 F1 (17 pages)
- GM5688E (140 pages)
- GR585 F1 (14 pages)
- 6400 (148 pages)
- GM5478 (2 pages)
- 7400 (156 pages)
- E-5250 (46 pages)
- FX6710 (1 page)
- E-9425R (118 pages)
- ALR 7200 (134 pages)
- FX542X (154 pages)
- 7250R (135 pages)
- 7250R (26 pages)
- DX430X (96 pages)
- 8450R (4 pages)
- 8450R (172 pages)
- 7450R (124 pages)
- E-5400 (130 pages)
- E-5200 (46 pages)
- PC (110 pages)
- GR160 F1 (14 pages)
- ALR 8300 (128 pages)
- eMachine 3 (96 pages)
- 9415 (188 pages)
- 980 (131 pages)
- 9210 (106 pages)
- E1400 (136 pages)
- FX542XT (94 pages)
- E3400 (126 pages)
- Media Center (28 pages)
- MT-6733 (3 pages)