Gateway E1400 - Manual (Page 74)

Updating the BIOS 67
Updating the BIOS
If you need a new version of the BIOS, you can download the BIOS update
from technical support on the Gateway Web site (www.gateway.com) and
install the new version from a diskette.
To update the BIOS you need to perform the following tasks in sequence:
Create a bootable diskette
Note the current BIOS settings
Create the BIOS update diskette
Update the BIOS
Restore the BIOS settings
To create a bootable diskette:
1 Enter DOS and type the following at the DOS prompt: format a: /s
1 Put a blank diskette in the diskette drive, then press E NTER .
2 Follow the instructions on the screen.
To note the current BIOS settings:
1 Remove the bootable diskette and restart your computer.
2 Enter BIOS Setup by pressing F1 when prompted during startup.
3 Write down the settings for each of the fields. (At the end of the BIOS
update process, you will reset the fields back to the values you recorded.)
4 Exit the BIOS Setup utility.
To create the BIOS update diskette:
1 Log on to the Internet.
2 Download the correct BIOS file from the technical support area of
www.gateway.com.
3 Decompress the contents of the BIOS file you downloaded and copy the
contents onto the bootable diskette.
05960.book Page 67 Monday, February 21, 2000 2:47 PM