Gateway E1400 User Manual
Page 70
Replacing the processor
63
6
Replace the heat sink:
a
Hook the metal clip on the heat sink to the tabs on the processor
socket. Make sure the heat sink is level with the processor and the
metal clips are securely attached.
b
Connect the heat sink fan cable to the fan connector on the system
board.
7
Close the case. (See “Closing the case” on page 23 for instructions.)
8
Reconnect the cords you removed, then turn on the computer.
You do not have to manually adjust the processor speeds. Your system BIOS
automatically detects the processor speed for you.
Caution
It is very important that the heat sink makes direct contact
with the processor or else it will not cool correctly, resulting
in processor failure.
05960.book Page 63 Monday, February 21, 2000 2:47 PM
- E-2300 (134 pages)
- E-4100 (144 pages)
- ALR 7300 (138 pages)
- E-4650 (134 pages)
- E-6300 (136 pages)
- E-9232T (96 pages)
- 610 (108 pages)
- ProfileTM 5 (292 pages)
- Profile 6 (130 pages)
- E SERIES E-6000 (190 pages)
- SZSL95IN0XXXXXXXX (132 pages)
- 8400 (34 pages)
- DX4800 (94 pages)
- GR380 F1 (17 pages)
- MAN FX510 (150 pages)
- GM5688E (140 pages)
- GR585 F1 (14 pages)
- 6400 (148 pages)
- GM5478 (2 pages)
- 7400 (156 pages)
- E-5250 (46 pages)
- FX6710 (1 page)
- E-9425R (118 pages)
- ALR 7200 (134 pages)
- FX542X (154 pages)
- 7250R (135 pages)
- 7250R (26 pages)
- DX430X (96 pages)
- 8450R (4 pages)
- 8450R (172 pages)
- 7450R (124 pages)
- E-5400 (130 pages)
- E-5200 (46 pages)
- PC (110 pages)
- GR160 F1 (14 pages)
- ALR 8300 (128 pages)
- eMachine 3 (96 pages)
- 9415 (188 pages)
- 980 (131 pages)
- 9210 (106 pages)
- FX542XT (94 pages)
- E3400 (126 pages)
- Media Center (28 pages)
- MT-6733 (3 pages)