Gateway E1400 - Manual (Page 52)

Adding or replacing memory 45
5
System
Components
Adding or replacing memory
The Synchronous Dynamic Random Access Memory (SDRAM) Dual Inline
Memory Modules (DIMMs) supported by your system board conform to the
following standards:
16 MB, 32 MB, 64 MB, 128 MB, and 256 MB
Non-ECC (64-bit) memory
Single- or double-sided configurations
512 MB maximum system memory
The system board contains two DIMM sockets. You can fill the sockets with
16-MB, 32-MB, 64-MB, 128-MB, or 256-MB DIMMs in any combination to
expand the SDRAM up to 512 MB.
If your processor has a 66-MHz front side bus (FSB), you can use 66-MHz or
100-MHz SDRAM. If your processor has a 100-MHz FSB, you should use only
100-MHz SDRAM.
No jumper settings are required for the memory size or type because the BIOS
automatically detects this information.
05960.book Page 45 Monday, February 21, 2000 2:47 PM