Gateway E1400 - Manual (Page 54)

Adding or replacing memory 47
5 Insert the DIMM into the socket and align the two bottom notches in
the DIMM with the two notches in the DIMM socket.
6 Gently press the DIMM into the socket until the plastic socket clamps
on each side of the socket snap into the notches on the side of the DIMM.
7 Replace the drive tray. (See “Reinserting the drive cage” on page 28 for
instructions.)
8 Close the case. (See “Closing the case” on page 23 for instructions.)
9 Reconnect the cords you removed, then turn on the computer.
05960.book Page 47 Monday, February 21, 2000 2:47 PM