Manual, To configure lan1 manually – Gateway 860 User Manual
Page 47
43
Main menu
www.gateway.com
5
Select
DHCP1 On
if you want to get an IP address assigned automatically
from the NAS, then press the
Enter
button.
- OR -
Select
DHCP1 Off
if you want to manually set the IP settings (IP address,
net mask, and gateway IP address), then press the
Enter
button.
An asterisk appears next to the DHCP On or DHCP Off option.
6
Select
OK
, then press the
Enter
button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.
Manual
This option lets you manually enter the IP, net mask and gateway IP address
for the LAN1 host.
To configure LAN1 manually:
1
Press the
Enter
button.
2
Press the
Next
or
Previous
button to select
Network
on the Main menu, then
press the
Enter
button.
3
Select
LAN 1
, then press the
Enter
button.
4
Select
Manual
, then press the
Enter
button.
5
Select
IPAddr1
, then press the
Enter
button.
6
Enter the IP address by pressing the
Enter
button to increase number input.
Press the
Next
button to move the cursor to input the remaining numerical
value of the IP address, then press the
Exit
button.
(Example) 192.163.001.010
7
Select
NetMask1
, then press the
Enter
button.
8
Enter the subnet mask, then press the
Exit
button to end input.
9
Select
GWIP1
, then press the
Enter
button.