Gianni Industries AD-425S - Manual (Page 3)

AD-425S
Automatic door operator
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9 0 0 1
Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Dimension
526
100
3 7 5
96
PUSH
HOLD
ON OFF
OPEN
GO 0
0
1
1
Unit: mm
Refer to figure for in-swing door (right-hand).
GEM
In-swing
Install AD-425S on an out-swing door, make sure
that the distance between the header and leaf is
not more than 60mm, and the space between the
header and Sliding Rail mounting hole must be
60mm, on an in-swing door, make sure that the
distance between Square Couplings and hinge is
not more than 74mm , the space between header
and the bottom of AD-425S must be 23mm, and
the space between header and Sliding Rail
mounting hole must be 39mm.
Depending on the door leaf opening
120°
Stopper Ball
(Max.)60mm
61mm
Out-swing
Header
23mm
39mm
74mm
In-swing
Header
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-AD425S Ver. C Published on 2008.09.19
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw