Grizzly G0716 - Manual (Page 22)

-20-
Model G0716 (Mfg. Since 2/11)
SEctiON 4: OpERAtiONS
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
NOTICE
if you have never used this type of machine
or equipment before, WE StRONGLy REc-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly industrial will not be held liable for
accidents caused by lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
to reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
basic controls
refer to figure 16 and the descriptions below to
better understand the basic controls used when
sanding.
A. Elevation Lock Knob: secures the sanding
head in place after adjusting the elevation.
additionally, this lock helps keep the sand-
ing drum parallel to the conveyor belt during
operation.
b. Elevation handwheel: adjusts the height of
the sanding drum above the conveyor belt to
control the depth of cut or accommodate new
workpieces.
c. pointer & Elevation Scale: displays the
current height of the sanding drum above the
conveyor belt in inches and millimeters.
D. ON/Off Switch: Controls power flow to the
sanding and conveyor motors. this switch
can be disabled for safety by removing the
key.
E. conveyor variable feed Rate Dial: adjusts
the feed rate of the conveyor belt from 0 to 10
FpM (Feet per Minute).
f. Lifting handles: provides a method to lift
and move the machine.
figure 16. Basic controls.
a
B
d
E
F
C